HPA Remote systems [Archive] - Bill's Paintball Forums

wil71M

13-11-2009, 02:38 PM

Hi All,
Im about to change over to using HPA, was just after some advice.
Does anyone know of a good remote system to use with HPA? only first fills will be 4500, then they are coming from scuba tanks, so around 3000. does anyone make a 4500 compatible remote system? preferably with slide check.
Any advice or input much appreciated!

Hornet Driver

13-11-2009, 03:03 PM

Plenty of them out there mate.

Do some shopping around and you'll get a good price. A lot of them have the slide check too.

One piece of advice though if I may; get yourself a back-up on/off for it as because you've got to degas every time you decide to come off the field (unless you're going to take off your vest/take your bottle out of your vest and leave it with your marker) you will be well served having a back up on/off, just in case.

They're pretty cheap to get too. :thumbsup:

wil71M

13-11-2009, 03:07 PM

Thanks Hornet,
will do. (not many advertise what PSI they can safely run was why i asked)

Greg.C

13-11-2009, 03:08 PM

here is a link to an interesting on/off and disconnect fitting for remotes (http://www.automags.org/forums/showthread.php?t=246628)

just noticed your state statement about pressure, if they say it will be fine for Co2 you will be ok for HPA, your hpa system does not send 4.5K of pressure into your gat. high pressure preset regs are set to around the 850psi mark which is the same operating pressure of co2

wil71M

13-11-2009, 03:22 PM

:oExcellent point, sorry its friday, i dont think too hard on days that end in 'Y':hammer:

HeDsHoTz

13-11-2009, 11:21 PM

Pretty much any remote will fit your purpose sollars.

Here's a link to the product Greg was talking about. The site is run by one of my contacts on the A5OG. If you mention that you're an Australian, and a friend of HeDsHoTz off the A5OG he may give you a bit of a discount.

{ LiNk To MiDwEsT CuStOm PaInTbAlL } (http://www.midwestcustompaintball.com/products/Warlock-Quick-Disconnect-Coupler.html)

wil71M

14-11-2009, 10:49 AM

^^^Thanks

liveandie

15-11-2009, 05:25 AM

An answer
"Ans Slide Check W On/off - Nickel" $49
http://paintballshop.com.au/Product.aspx?ID=2157108&Category=2013871