Help:Ego08 and CP Inline Reg

[JSC_Liason_neo]

Im looking for some help tuning a CP reg to an Ego 08 (the reg doesn't have a gauge)
I have read that the line pressure need to be about 250-260psi
Helpful info please

[Royale]

Does the cp reg have gauge ports?

Or you could put the cp reg on a marker with a gauge.

Or just turn the cp reg all the way down then tune over the chrony. (assuming you haven't touched the lpr)

[JSC_Liason_neo]

Does the cp reg have gauge ports?
Or you could put the cp reg on a marker with a gauge.
Or just turn the cp reg all the way down then tune over the chrony. (assuming you haven't touched the lpr)

No guage port on the reg
how do u know while tuning over the chrono?

[eddahenry]

Egos are ajusted Via the HPR so if your LPR is set to Cycle correctly just zero the reg (All the way off) and slowly turn it up till you get full cycles than add paint and ajust the HPR up or down for the Disered FPS