PDA

View Full Version : Converting a Myth Reg from HP to LP-How?


DugDaThug
10-03-2009, 05:54 PM
As the title reads, is it possible and how would i go about it?

Many thanks in advance.
Pounder
10-03-2009, 06:05 PM
PM Action John.

Believe it's a spring change, they were getting some in stock.
Mr FAT B
10-03-2009, 09:31 PM
PM Action John.

Believe it's a spring change, they were getting some in stock.


Yes Pounder is on the money, call Action they should have them, well thats the place I got them from:thumbsup:.

And they are easy to change.
HeDsHoTz
10-03-2009, 09:57 PM
What are the different psi outputs with the different springs in the Myth reg?

Aren't you better off (for most markers) to run a HP reg to save from drop-off with slower recharge rates from the LP setup?
DugDaThug
10-03-2009, 11:08 PM
Now, that would depend on the marker......... Angels only like LP. But this would only be a short stop until i can get a CP reg and adapter for the beast. Cheers muchly peeps.
Jake D
10-03-2009, 11:42 PM
Im under the impression that the standard one is the lp spring... The other spring you can get is the hp one...
Mr FAT B
11-03-2009, 08:20 AM
Im under the impression that the standard one is the lp spring... The other spring you can get is the hp one...

I think the standard spring is more of a medium pressure (arround 600PSI) then you can get LP springs (400PSI) and HP springs (800PSI) but I could be wrong.
DugDaThug
11-03-2009, 04:59 PM
I think the standard spring is more of a medium pressure (arround 600PSI) then you can get LP springs (400PSI) and HP springs (800PSI) but I could be wrong.

I think we have a winner.