Macro-line thread

[heavyduty1340]

Just trying to find out what size and type of thread is used for macro-line
fittings
If anyone can help it would be gr8 :yes:

cheers

Faedy

[BORGY]

1/8 npt or bsp..... bsp is only 1 tpi difference to npt so either will fit into the port of the reg but try to use npt.... Pneumatic or hydrualic suppliers should be able to order the following part numbers...............
Norgren... Stright 12 125 0418 $4.30 + gst
90 12 147 0418 $6.80 + gst

Legris.......Stright 3675 56 10 $4.39 + gst
90 3609 56 10 $8.40 + gst

The above fittings are cad plated brass all round and the 90 swivels after assembly....

The Hp line you need to join the preset on the bottle and reg on the gun needs to handle the out put pressure of the pre set..... I would only recomend to use parker parflex tube....... The line is comes in red, black, green, blue yellow and natural and can handle a working pressure of 625psi.... You can order this from a parker distriubtor such as Enzed hose and fittings.....

Parker....... Black CYLN-04 $3.57 p/m


Good luck...........

[Pyro]

Sorry borgy but holy crap i picked the tube up for $1.70 p/m

[BORGY]

cheap....... very cheap....... if i buy 100 roll its only $142.90

[heavyduty1340]

Borgy
You answered all my qu's
Cheers for that

Faedy