PDA

View Full Version : ICD defiant


Eco Warrior#1
29-01-2005, 05:17 PM
hey guys, we heve an icd defiant that just doesnt want to charge. i have dissassembed, cleaned, lubed and reassembled as per manual,and have had the board checked and cleaned. but still no go. when i pull the bolt back and let it go it seems that it isnt quite opening the valve properly?

any help greatly appreciated. :help: :thumbsup:
Eco Warrior#1
31-01-2005, 05:06 PM
Anyone?
Neil
31-01-2005, 05:19 PM
What dip swithes do you have turned on ...inside the grip?
Switches 5 and 3 should be on and all others off...
Give me a ring on 03 59964506 or 0419118045 and i will talk you through it.
Cheers, Neil
Frenchie
09-02-2005, 11:17 AM
Yeah we cheked that the rite switches were on and they were but what the big problem was that it just wont cock when the air gets conected ????
JagerCoRps
10-02-2005, 07:12 PM
I know it's a silly question,
But have you turned the reg on on the supply bottle,
Have you adjusted the low press reg as well.

Give james a buzz at mac dev
Frenchie
10-02-2005, 10:06 PM
we didnt adjust nething from the last time we used it, and it was goin fine then. But the reg is on and we havnt mucked round with the low pressure reg.
But i guess we will just hav to send it away instead
Frenchie
10-02-2005, 10:09 PM
:thumbsup: Thanks for ur help fellas :respekt:
GAV WA
14-03-2005, 10:52 PM
Just from what you have said it sounds like the Lpr is your problem, hard to tell from just what you described. Though you haven't adjusted anything doesn't mean it isn't dirty or gunked up (when was it last serviced?) bad LPR means low pressure behind the ram, so no go. Don't really need to send it away first read the manual about what it says about servicing the LPR.