View Full Version : Vision eye
shooter mcgavin
26-01-2005, 02:38 PM
When i turn my vision eye on it wont shoot any paint?? its a 04 shocker
any ideas why :help:
Deadeye
26-01-2005, 02:51 PM
clean the eye, check the eye cables are connected and not loose, put fresh batteries in.
i8dafrog
26-01-2005, 03:09 PM
Yea dude the eye is dirty might even have a bit of shell stuck on the detent covering the eye, just remove detents and eye cover and give a wipe with a soft cloth
shooter mcgavin
26-01-2005, 08:05 PM
i pulled the eye out cleaned it, changed batteries...and still nothing :cry:
ill get some one that knows a bit more about markers..befor i break it :p
i8dafrog
26-01-2005, 09:40 PM
take the grip off and check whether the eye is still connected to the board happend to me while cleaning 3hrs of reading manuals and internet and i found out that i had somehow disconected it :o
Does the light come on?
I had a problem where i adjusted the trigger up too tight meaning that it was always "firing", so no matter how many times you pulled the trigger it would never shoot.
You will know if you have done this as the marker will "chirp" as you turn it on and switch to vision etc. but the actual light will not flash
shooter mcgavin
26-01-2005, 10:56 PM
yeh the lights coming on, it'll shoot the 1st shot the like it always does..but then it wont shoot any more..it beeping as there is no paint in there?..iv cleaned the eye several times new batteries looked at the cables and plugs, pushed them in incase..still not shooting :( :help:..grr
You arent using black shelled paint are you?
Single sided eyes dont like dark shelled paint as they dont reflect light well.
If any of this doesnt work call John at Action and he may be able to troubleshoot you over the phone as they distribute shockers etc.. in AUS
Give John at Action Paintball Games a call on 02 9679 0011. :thumbsup:
Whitey
27-01-2005, 08:27 PM
You didn't let Nathan any where near it did you ???????????????????
AKA the man who shouldn't touch guns in Cairns
lol yes nathan did touch it with his passion fingers, thats what the problem prob is! :lol:
shooter mcgavin
27-01-2005, 09:05 PM
hahahaha, maaaybe :rofl: , Im gunna get some brighter paint and try it out and hopefuly that should be it, cuz the paint goin threw it now is black & yellow..i thought that dark paint didnt work in only inferred eyes :o but owell :p...thanks for all the help every one :respekt:
Eco Warrior#1
28-01-2005, 05:17 PM
Goddammit Guys, i do not have passion fingers and have never broken a gun in my whole career :hammer: :hammer: :hammer:
we are putting a different paint throught it tomorrow. see how it goes. :cool:
i8dafrog
28-01-2005, 05:20 PM
Dude Shooter just a tip also a lil lesson i learnt the hard way yet again what ever u do dont get the ball detents mixed up otherwise it will cause u more unessecary stress :o :yes:
Powered by vBulletin® Version 4.1.8 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.